Available sizes

Blocks, Slabs (2 Cm, 3 Cm& 4 Cm thickness), Cut to sizes and tiles.

Available surface finishes

bushhammered

bushhammered

Tumbled

Tumbled

Split face

Split face

Acid washed

Acid washed

Brushed & chiseled

Brushed & chiseled

sand blasted

sand blasted

Unpolished (Saw-Cut Finish)

The rough finish surface resulting from cutting the stone with any kind of blades.

Applications: walls & floors (exterior)

Honed

A sati-smooth Stone finish. Honed finish has a matte or satin finish for a softer, more subdued look, achieved by stopping just short of the last stage of polishing.

Applications: walls & floors (interior & exterior)

Polished

A Shiny, mirror-like finish resulting from filling the pores of the rough saw-cut surface through treating and grinding the surface using some polishing abrasive stones. Marble, Limestone & Granite slabs are polished by large polishing machines, which progressively grind the rough saw-cut surface giving it a spectacular mirror-like finish.

Applications: walls & floors (interior & exterior)

Acid treated

Stone surfaces are treated by acids to give them a spectacular antique look.

Applications: walls & floors (interior)

Brushed

An antique stone finish produced by continuous scrubbing of the surface with wire brushes.

Applications: walls & floors (interior & exterior)

Sand blasting

A high pressure jet of siliceous sand/ or steel shots is applied to the area to be treated. This treatment produces a smooth abrasion, leaving the material with a slightly scratched surface (but not roughed). The color tones and the veins are slightly dulled.

Applications: walls & floors (interior & exterior)

Bush-hammering

A mechanical round hammering process that produces textured surfaces varying from subtle to rough.

Applications: walls (interior & exterior) & floors (exterior)

Facial chiseling

This surface is produced manually by using chisel and hammer and is used mainly in wall claddings and facades.

Applications: walls (interior & exterior)

Tumbled

Tumbling is vibrating the tiles with some special stones to give the surface a textured and antique look whereby the edges are rounded and imperfect.

Applications: walls & floors (interior & exterior)

Flamed

Applying blowtorch-strength heat to the surface of Marble & Granite, this actually pops some of the crystals and creates a deeply textured surface which produces flamed Stone. In addition to its rough beauty, flamed Granite has a highly textured surface, which gives it a very non-slippery surface, ideal for exterior installations.

Applications: walls & floors (exterior)

Striped

A Stone finish with parallel grooves cut into it. Available with 1-4 grooves to the inch (254mm), the finish may be executed by hand (hand-tooled) or machine (machine-tooled).

Applications: walls (interior & exterior)

Split face

Split face surfaces are those which are left natural after manual splitting of Stone along planar surfaces. This finish shows the actual natural earthy tone of the Stone.

Applications: wall cladding (interior & exterior)